Megamart

Pedestals
12 PRODUCTS
H 35 ÷ 1020 MM
FOR TILE FLOORS
& DECKING
CAPACITY UP TO
1000 KG/PC
LOCKNUT

The quality immediately shows through, thanks to a structure able to carry 1000 kg per piece, counter ring nuts for mechanical blocking of the height and an adjusting ring nut that allows two simultaneous movements between base and screw, doubling the adjustment and installation speed.

The MegaMart series consists of 12 products: the first 3 cover heights from 35 to 120 mm. From the fourth onwards (MM4 with a range of 115-220 mm), the base allows you to position the support in the opposite direction, placing the headpiece on it and obtaining an increased support surface, which is essential for laying small tiles (see photo on page 45). All subsequent heights up to 1020 mm are divided into 8 products with a range as long as 105 mm, plus 1 to 8 extensions measuring 10 cm in height.

A versatile system that allows for minimum stock and streamlines procurement on site, with a shorter processing time or products to be processed – all with the aim of speeding up installation.

The large selection of headpieces available for MegaMart supports always provides the right solution for your project, both with tiles and with the installation of decking. The EasyKey multifunction adjustment key and the CP slope correctors can be used across the whole series.

LOCKNUT
WITH THE MECHANICAL LOCKNUTS, YOU CAN MECHANICALLY LOCK THE HEIGHT OF THE SUPPORT ONCE IT REACHES THE DESIRED HEIGHT FOR GREATER GUARANTEED STABILITY.

⌀ 150
⌀ 200
MM1
35÷50
MM2
50÷75
MM3
75÷120
MM4
115÷220
MM5
215÷320
MM6
315÷420
MM7
415÷520
MM8
515÷620
MM9
615÷720
MM10
715÷820
MM11
815÷920
MM12
915÷1020