Martinetto supports provide maximum versatility, thanks to heights from 35 to 380 mm and the wide range of heads for stone and ceramic floors, and decking.
As a result of its combination between the base, extensions and special heads, it’s an all-in-one product solution for installation on different types of construction sites. A selection of as many as 8 types of heads guarantees the right solution, both for installation with tile finishes (with tabs 18MM high and 2, 4, 6 or 10 MM thick) and with decking (flat with 120MM diameter, circular with housings for 40 or 60 MM joists, rectangular 90×120 MM or square 120×120 MM).
All types of Martinetto Supports are guaranteed to bear concentrated loads of 400 kg each. A 400 kg concentrated load means an evenly distributed load of 1,600 kg/m2 for 50×50 cm tiles and 2,500 kg/m2 for floors made up of 40×40 cm tiles.
The Martinetto support has been designed for installation of any type of flooring on any surface, allowing inspection of the various installations beneath, without needing to demolish anything, and can also be used with EasyFlat slope correctors to eliminate slopes up to 10%.